Get webhook notifications whenever Network & Infrastructure creates an incident, updates an incident, resolves an incident or changes a component status.
Nous allons mettre a jour ce couple de n56 dans la dernière version du nxos qui fixe pas mal de bug relatif au fex2348 et améliore la stabilité globale.
La maj se fera dans la nuit du 26 au 27 Novembre 2015 a partir de 22h30.
Il n'y pas d'impact a prévoir, l'upgrade sera faite en ISSU ( maj Hitless)
Les block d'ip concernés sont :
149.202.74.0/24
149.202.75.0/24
149.202.76.0/24
149.202.77.0/24
Update(s):
Date: 2015-11-27 00:14:57 UTC 108 fex108 Online N2K-C2232TM-E-10GE SSI182206X9
ON regarde a present les derniers serveurs dans le monitoring
Date: 2015-11-27 00:09:39 UTC le fex108 est remplacé
Date: 2015-11-27 00:03:42 UTC Cela prend plus de temps que prévu, la place est limitée dans la baie pour installer le spare et tagguer les RJ.
Date: 2015-11-26 23:48:37 UTC le fex est kill dead..... on le remplace par un spare
Date: 2015-11-26 23:43:59 UTC tout les fex sont UP a part le fex108, on le reboot hard.
Il ne revient pas (sur aucun des 2 nexus)
Date: 2015-11-26 23:33:15 UTC je up les Fex sur le A.
Date: 2015-11-26 23:25:42 UTC le A a crashé de la meme facon que le B lors de l'ISSU
gra1-30a-n56# sh system reset-reason
----- reset reason for Supervisor-module 1 (from Supervisor in slot 1) ---
1) At 435386 usecs after Fri Nov 27 00:16:15 2015
Reason: Reset triggered due to HA policy of Reset
Service: ipqosmgr hap reset
Version: 7.1(3)N1(1)
Date: 2015-11-26 23:03:50 UTC tous les fex sont online
Chaque FEX est passé (ou va passer) en AA-Version Mismatch et se mettre a jour en 7.1.3
Date: 2015-11-26 22:36:44 UTC Nouveau cas de crash HA policy of Reset: Service: ipqosmgr hap reset
ra1-30b-n56# sh system reset-reason
----- reset reason for Supervisor-module 1 (from Supervisor in slot 1) ---
1) At 288287 usecs after Thu Nov 26 23:17:02 2015
Reason: Reset triggered due to HA policy of Reset
Service: ipqosmgr hap reset
Version: 7.1(3)N1(1)
Date: 2015-11-26 22:20:53 UTC hum ca ne se passe pas comme prevu,
durant le reboot du B, les fex sont passé offline sur le A
Module 1: Refreshing compact flash and upgrading bios/loader/bootrom/power-seq.
Warning: please do not remove or power off the module at this time.
Note: Power-seq upgrade needs a power-cycle to take into effect.
On success of power-seq upgrade, SWITCH OFF THE POWER to the system and then, power it up.
Note: Micro-controller upgrade needs a power-cycle to take into effect.
On success of micro-controller upgrade, SWITCH OFF THE POWER to the system and then, power it up.
[####################] 100% -- SUCCESS
Upgrade can no longer be aborted, any failure will result in a disruptive upgrade.
Requesting Line Cards to stop communication.
[####################] 100% -- SUCCESS
Requesting Sup Apps to stop communication.
[####################] 100% -- SUCCESS
Freeing memory in the file system.
[####################] 100% -- SUCCESS
Loading images into memory.
[####################] 100% -- SUCCESS
Saving supervisor runtime state.
Date: 2015-11-26 22:02:38 UTC Nous allons commencer l'intervention
Date: 2015-11-25 17:59:50 UTC Uniquement du Rolling vers la nouvelle version
gra1-30a-n56# sh install all impact kickstart n6000-uk9-kickstart.7.1.3.N1.1.bin system n6000-uk9.7.1.3.N1.1.bin
Extracting \"system\" version from image bootflash:/n6000-uk9.7.1.3.N1.1.bin.
[####################] 100% -- SUCCESS
Extracting \"kickstart\" version from image bootflash:/n6000-uk9-kickstart.7.1.3.N1.1.bin.
[####################] 100% -- SUCCESS
Extracting \"bios\" version from image bootflash:/n6000-uk9.7.1.3.N1.1.bin.
[####################] 100% -- SUCCESS
Extracting \"fex4\" version from image bootflash:/n6000-uk9.7.1.3.N1.1.bin.
[####################] 100% -- SUCCESS
Extracting \"fexth\" version from image bootflash:/n6000-uk9.7.1.3.N1.1.bin.
[####################] 100% -- SUCCESS
Performing module support checks.
[####################] 100% -- SUCCESS
Notifying services about system upgrade.
[####################] 100% -- SUCCESS
Compatibility check is done:
Module bootable Impact Install-type Reason
------ -------- -------------- ------------ ------
1 yes non-disruptive reset
2 yes non-disruptive rolling
100 yes non-disruptive rolling
101 yes non-disruptive rolling
102 yes non-disruptive rolling
103 yes non-disruptive rolling
104 yes non-disruptive rolling
105 yes non-disruptive rolling
106 yes non-disruptive rolling
107 yes non-disruptive rolling
108 yes non-disruptive rolling
109 yes non-disruptive rolling
110 yes non-disruptive rolling
111 yes non-disruptive rolling
112 yes non-disruptive rolling
113 yes non-disruptive rolling
114 yes non-disruptive rolling
115 yes non-disruptive rolling
116 yes non-disruptive rolling
117 yes non-disruptive rolling
118 yes non-disruptive rolling
119 yes non-disruptive rolling
120 yes non-disruptive rolling